Steel wire reinforced hydraulic oil hose assembly

Hydraulic oil hose is also called hydraulic rubber hose, high pressure oil hose, steel wire braided oil hose, steel wire braided rubber hose, generally divided into steel wire braided hydraulic hose and steel wire spiral hydraulic hose.

Hydraulic oil hose assembly parameters:

1. Inner Tube: Oil resistant synthetic rubber

2. Reinforcement: 1 - 6 layers high tensile steel wire

3. Cover: Abrasion and weather resistant synthetic rubber

4. Temperature Range: -40℃ to +120℃

5. Connect type: female or male thread, flange, quick coupling, etc.

6. Hose length can be special customized according to user needs

Precautions for the use of hydraulic oil hose:

Due to the complexity of the types of hoses, the diverse structures, and the different conditions of use, the service life of the hoses is not only determined by the quality, but also by the correct use and maintenance. Therefore, even if the product has a very high quality, if it cannot be used and maintained correctly, it will seriously affect its quality and life span, and even cause serious accidents that should not occur, causing damage to property.

Provide the following considerations:
1. The hydraulic oil hose can only be used to convey the designed material, otherwise it will reduce the service life or fail.
2. Use the correct length of the hydraulic hose, pay attention to the length change of the hose under high pressure (-4%-+2%) and the length change caused by mechanical movement.
3. The hose cannot be used under the condition of exceeding the design working pressure (including impact pressure).
4. Under normal conditions, the temperature of the medium conveyed by the hose should not exceed -40℃-+120℃, otherwise the service life will be reduced.
5. The hose should not be used under the minimum bending radius of the hose, avoid bending or bending near the joint, otherwise it will hinder the hydraulic transmission and conveying materials or damage the hose.
6. The hydraulic oil hose cannot be used in a twisted state.
7. The Steel wire reinforced hydraulic hose should be handled carefully, and should not be dragged on sharp and rough surfaces, and should not be bent or flattened.
8. The hose should be kept clean and the inside should be flushed (especially the acid pipe, spray pipe, mortar pipe). Prevent foreign objects from entering the pipe, obstructing the delivery of fluid, and damaging the equipment.
9. The Steel wire reinforced hydraulic oil hose that exceeds the working period or storage period shall be tested and identified before it can be used continuously.

Steel wire reinforced hydraulic oil hose assembly application:
It is suitable for engineering construction, lifting, transportation, metallurgical forging presses, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools, and various industrial sectors, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) liquid transmission.

Welcome to contact us for more information:
E-mail: info@hbdhindustrial.com
WhatApp WeChat: +8615076851961